Reference: KV6D12AM

Hotend V6 Direct 12V (all metal)

0 review

Complete V6 clone hotend kit for direct extrusion. If you need a different combination (type of barrel, type of block, nozzle size, etc.) you just have to add the individual components that make up the kit to your cart, replacing the one you don't want with the one you don't want (For example, not adding a 0.4 nozzle and adding the 0.6 one) *non-original...

Reference: TOV63010

Hotend V6 Nozzle (3010)

0 review

Adapter for 3010 fan on V6 heatsinks

Reference: DISV6DIR

Hotend V6 Clone Heatsink

0 review

Aluminum heatsink for hotend V6. Lower M7 thread for compatibility with V6 barrels

Reference: METH1041M

Semitec 104GT temperature sensor

0 review

Temperature Sensor/Thermistor Semitec 104GT Connector: Without Connector Head: metal 3mmx15mm Maximum measurement temperature 270º **This thermistor must be configured in Marlin as a type 5 sensor (# DEFINE TEMP_SENSOR_0 5)

Reference: REF000664D

NTC 3950 100K Encapsulated Temperature Sensor

0 review

Temperature Sensor//Thermistor NTC 3950 100k ohms Connector: Without Connector Head: metal 3mmx15mm Quick connector located approximately 15cm from the tip. Maximum measurement temperature 300º

Reference: MEBICR10

Heatbreak CR10 Bi-Metal

0 review

High quality bore type heatbreak or barrel for CR10 printer or MK8 hotends The combination of copper and steel improves heat evacuation over a steel or titanium heatbreak, which means greater temperature differences between the block and the heatsink. Not valid for Artillery Genius/X1 Material: Steel/Copper Bottom Diameter: M6 threaded Upper Diameter: M7...

Reference: VS501524V

Brand: Sunon

Sunon MagLev 5015 Fan (12/24V)

0 review

Top quality fans with magnetic levitation bearings, probably the best existing bearing system for fans, combining the durability of ball bearings with the silence of friction bearings. A magnetic bearing is a bearing that holds a load using magnetic levitation. Magnetic bearings make it possible to hold moving parts without having physical contact with...

Reference: WLK000026A

Hotend Volcano Block

0 review

Aluminium block Volcano, This block cannot be used with a nozzle other than Volcano, plastic leaks will occur, please do not try. This kit does not include any of the electronic components. Not compatible with Artillery X1 or Artillery Genius

Reference: UUU000068

Hotend MK8 Threaded Kit

0 review

0.4mm nozzle Aluminum Block 40W 12V heater Thermistor (bulb) 30mm threaded Barrel

Reference: WHG000085

Brand: BIQU

Heatbreak BIQU H2 M6 All Metal Titanium

1 review

Material: Titanium. Guy: All metal. Lower diameter: M6 threaded Top Diameter: M6 smooth Length: 22.5mm

Reference: UUU001870

Brand: BIQU

BIQU H2 Double Gear Direct Extruder

0 review

Compact integrated extruder, with low weight and high traction capacity. Ideal for converting your bowden machine to live Only available a 24v model, for installation on 12v machines it is necessary to purchase a heater of that voltage

Reference: UUU001837

Brand: BIQU

BIQU B1 Trolley

0 review

Complete cart for BIQU B1 It is delivered assembled, for direct replacement. Parts included: 1.75/0.4mm M6 brass nozzle Aluminum Block 4010 24V layer fan 3010 24V extruder fan Barrel bore 4.1 24V 40W Heater Cartridge Thermistor Leds Module PCB Board: B1 HOTMODE V1.0 Plastic Cover PTFE (Teflon) Tube: 0.6 Meter 2x4mm Pneumatic connector: PC4-01 M10

Reference: ARTJ054

Brand: Artillery 3D

ARTILLERY X1/ X2/X2/Genius/Genius PRO Extruder Cover

1 review

Metal extruder cover with integrated heatsink to improve thermal transfer for Artillery X1/X2/Genius/ Genius PRO printers. Valid for Kraken type barrels/heatbreaks (flat)

Reference: 6834895830824

Hotend Titanium CR10

0 review

Complete “All Metal” hotend for Creality CR-10 printers (also valid for otros Creality models). With an all metal barrel, Teflon does not reach the nozzle, and can therefore reach temperatures greater than 230º without problems of damage to the teflon tube typical of a Bore type barrel. The improved finish of the inner surface will help reduce extrusion...

Reference: 6834898033956

PT100 Temperature Sensor

0 review

Encapsulated PT100 temperature sensor, capable of measuring temperatures up to 450ºC, which allows the printing of technical materials such as PEEK. The sensor is divided into two sections connected with a quick connector, which allows it to be replaced quickly and easily Compatible with V6 blocks, volcano, mosquito, etc... Length: 1m ***Please note that...

Reference: 6834891118414

Heatbreak Mosquito Crazy Magnum

0 review

Heatbreak/Barrel of bimetal type valid for Mosquito crazy type hotends, it is compatible with all materials, including PLA ABS PA TPU POM, etc. Magnum version that allows the use of high-flow nozzles such as 0.6 MM-0,8 MM by providing a larger heating surface (similar to E3D's volcano-type hotends)