Reference: 8430095616954

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.70
In stock

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
In stock

Reference: REF000081R

Teflon tube

Generic Teflon tube Inner diameter (ID): 1.9mm ± 0.15mm Outer diameter (OD): 4.0mm You can adjust the desired length, adding as many 10cm units as you want. We will supply the tube continuously for lengths less than 2m.

From Price €0.30
In stock
All best sellers
  • Banner

  • Out of stock

Resina UV Anycubic Skin


Professional resin for LCD 3D printers, optimized to work with low-light LCD projectors, we do not recommend use in DLP or SLA printers.

High speed of solidification. This resin performs excellently, preventing excessive shrinkage, it also improves printing speed, reduces cure time and improves printing time on LCD machines


Tax included Shipping excluded
Out of stock

rating No review at the moment
  • Shake the resin well before use, do not use the resin in places where light rays reach.
  • Use gloves when handling the resin, avoid direct contact with the skin, and operate in a well-ventilated area.
  • If you have direct contact with the resin on the skin, wash with plenty of water as soon as possible. If you feel unwell, you must receive immediate, measured care.
  • Cleaning models uses a high concentration of alcohol (the recommended concentration is 95% or more, isopropyl alcohol is our recommendation).
  • Do not place the remaining unused resin with the resin from the can, this is to avoid contamination of the new resin, since the used resin can be contaminated by UV rays, dust and so on, so always try to use the right amount or, failing that, try to finish the resin in the tank so as not to reuse it.
Product Details

Data sheet

Base Tone