Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
There are 17 products.
Reference: FUNNECOM
Brand: Prusa
0 review
Silicone sock for the set of Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9 *Non-original product Prusa
Reference: 1794
Brand: Prusa
0 review
Silicone sock for the set of the Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9
Reference: 1781
Brand: Prusa
0 review
Aluminum block for the whole of the Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9
Reference: 1780
Brand: Prusa
0 review
Replacement 40W-120mm heater (with bend) for the Nextruder for Prusa XL This heater is compatible with PRUSA XL
Reference: 1779
Brand: Prusa
0 review
Replacement 40W-120mm heater for the Nextruder for Prusa XL This heater is compatible with PRUSA MK4
Reference: 1778
Brand: Prusa
0 review
Thermistor (Temperature Sensor) NTC 100k - 90 mm spare for the Nextruder. Supports Prusa MK4
Reference: 10601-000720
Brand: Prusa
0 review
Thermistor (Temperature Sensor) NTC 100k - 115 mm spare for the Nextruder. Supports Prusa XL
Reference: 1776-3551
Brand: Prusa
0 review
2The ObXidian nozzle is a high-quality nozzle designed specifically for the Nextruder. It is made of hardened steel with a corrosion-resistant treatment, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials such as carbon fiber, as they maintain their hardness even at higher...
Reference: 1775
Brand: Prusa
0 review
In case you want to use your V6 nozzle on the Nextruder, install it in conjunction with this nozzle adapter. This product includes: Adapter Nextruder to V6 nozzle (1x) *V6 nozzle is not included
Reference: 1774-3541
Brand: Prusa
0 review
For the next generation of printers Prusa Special nozzles with an all-metal filament guide are used. This means that the entire filament path through the Nextruder it's all-metal, with no PTFE tubing anywhere. This improves the overall reliability of the printer and makes changing nozzles much faster. Nozzle valid for the following printers: Prusa MK3.9,...
Reference: 7866-000568
Brand: Prusa
0 review
This product is the replacement fuser fan. It is only compatible with the MK3/S/+. The Rambo of the MK2.5/S requires V-cable adapter, the fan can NOT be connected to the Rambo of the MK2.5/S directly. Supports: Prusa MK3/S/+ , MK2 and MK2.5 Specs: - Voltage: 5v - Format 4010
Reference: 8594173675001
Brand: Prusa
0 review
Prusament PLA is a filament developed and produced by PRUSA. The entire manufacturing process is monitored and tested ensuring an accuracy of ± 0.02 mm and very consistent colors.
Reference: 8594173675766
Brand: Prusa
Prusament PETG is a filament developed and produced by PRUSA. The entire manufacturing process is monitored and tested ensuring an accuracy of ± 0.02 mm and very consistent colors.
Reference: 8594173675094
Brand: Prusa
0 review
Prusament PETG is a filament developed and produced by PRUSA. The entire manufacturing process is monitored and tested ensuring an accuracy of ± 0.02 mm and very consistent colors.
Reference: 8079-014029
Brand: Prusa
0 review
Original Prusa cover fan. Compatible with: Prusa MK3/S/+ and MINI/+. Specifications: - Voltage 5v - Format 5015
