- Out of stock

Reference: 8430095626656
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the options to select
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
Generic Teflon tube Inner diameter (ID): 1.9mm ± 0.15mm Outer diameter (OD): 4.0mm You can adjust the desired length, adding as many 10cm units as you want. We will supply the tube continuously for lengths less than 2m.
Reference: ARTD013
Brand: Artillery 3D
Original Temperature Sensor (Thermistor) for Artillery X1/Genius/X2/Genius Pro Connector-xh2.54,length 80mm, head diameter 3mm Photo shown for illustrative purposes, the product may not correspond exactly as Artillery supplies sensors that, although they are all compatible, are not aesthetically the same.
Banner
Original flat data cable for Artillery Genius/Genius PRO
Width 25mm
Length 420mm
24-pin
Reference: REF000556
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: ARTD012
Brand: Artillery 3D
Original heater for the hotend of your Artillery X1 or Artillery Genius.24V, 64W, VH3.96 Terminal
Reference: ARTD013
Brand: Artillery 3D
Original Temperature Sensor (Thermistor) for Artillery X1/Genius/X2/Genius Pro Connector-xh2.54,length 80mm, head diameter 3mm Photo shown for illustrative purposes, the product may not correspond exactly as Artillery supplies sensors that, although they are all compatible, are not aesthetically the same.
Reference: ARTD061
Brand: Artillery 3D
Extruder Connection PCB Board and Hotend for Artillery Genius 21mm 24-pin girdle slot Not valid for Artillery X1(requires 20-pin version)
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the options to select
Reference: ARTZ041
Brand: Artillery 3D
Original flat data cable for X-axis motor Genius/Genius PRO (Not valid for Artillery X1/X2) 30-pin /420mm
Reference: ARTZ065
Brand: Artillery 3D
PCB board for X-axis Artillery Genius / Genius PRO / X2 Compatible with 31mm and 21mm belt (24-pin) Not valid for Artillery X1 (requires 20-pin version)
Reference: 6834898797346
Brand: Artillery 3D
Complete hotend for artillery X1 (with smooth extruder cover)/X2/Genius PRO /Genius. It includes: Barrel smooth bore 4.1 Heater Thermistor Silicone cover 0.4mm brass nozzle * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTACE40
Brand: Artillery 3D
40mm adhesive fabric (acetate) tape, used to attach flat artillery cables to the aluminum chassis cut in 34cm sections, valid for Artillery X1/Genius
Original flat data cable for Artillery Genius/Genius PRO
Width 25mm
Length 420mm
24-pin