
Reference: 8430095616954
Brand: Nazza
Nazza Isopropyl Alcohol
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
The nozzles Volcano are designed for use with blocks of type Volcano, this type of blocks allow a greater flow which allows a combination of speed-height of layer -nozzle size much higher than other nozzles of smaller size
Original article by E3D
Material
Brass: supplied with the printer, valid for printing the most common materials (PLA, PETG, ABS, ETC). They have better thermal conductivity than steel nozzles
Stainless steel: suitable for printing objects that will be in contact with food or with the mouth or respiratory tract since it does not contain lead.
Hardened steel: suitable for printing with materials that contain chips from hard materials such as carbon fiber, metal, etc. Their lifespan with these materials will be longer than a standard brass nozzle.
Silver-plated copper: valid for printing at high temperatures (<500 degrees) on non-abrasive materials
Nozzle X: the most professional E3D nozzle, hardened steel coated with nickel and coated with a special WS2 coating, they allow printing of up to 500 degrees of abrasive materials.
Size
<0.4mm: suitable for maximum detail at the expense of increased printing times
0.4mm: most common size, with a good compromise between printing time and detail
0.5-0.6mm: nozzles commonly used to increase printing speed without a great loss of detail, also used for materials with large traces such as wood filament.
>0.6mm: used for large prints, the loss of detail is notable. For these sizes, it is recommended to have a volcano-type hotend, since the amount of material to be melted per second can be too much for a normal hotend
.For materials that contain traces of hard materials such as metals, carbon fiber, etc., the use of hardened steel nozzles is recommended.
Manufacturer: E3D
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000556
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: ARTD012
Brand: Artillery 3D
Original heater for the hotend of your Artillery X1 or Artillery Genius.24V, 64W, VH3.96 Terminal
Reference: ARTD013
Brand: Artillery 3D
Temperature Sensor (Thermistor) original for Artillery X1/Genius/x2/Genius Pro Connector-XH2.54, length 80mm, head diameter 3mm Photo shown for illustrative purposes, product may not correspond exactly as Artillery It supplies sensors that, while they are all compatible, are not aesthetically the same.
Reference: REF000644
Teflon tube cutter with sturdy ABS body. Suitable for cutting flexible plastic tubes. Cutting with this tool ensures that the tube is not crushed during cutting, as well as a perpendicular cut, which will avoid jamming problems. WARNING: The color supplied may not match the one shown in the photo
Reference: 6834895210152
Heatbreak or barrel High quality type all metal in the Teflon input only reaches the top of thebarrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few degrees more...
Reference: ARTJ024
Compatible Aluminum Block E3D Volcano, requires nozzle Volcano What's not included thermistor, heater or heatbreak/barrel. Includes hardware Valid for Artillery Genius, X1, Genius PRO, X2
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: TTBRTIT
Brand: Makerex
Metal arm for the original extruder of the printers Artillery X1 and Artillery Genius or for any Titan type extruder Incorporates sprocket for better filament traction
Reference: TTART
Brand: Artillery 3D
Teflon tube Artillery Inner diameter (ID): 2mm Outer diameter (OD): 4mm Length: 10cm
Reference: RUDETIME
High-quality sprocket for extruder Titan. This part has a much more precise and deep machining than that usual in extruders Titan as standard printers Artillery, these characteristics make it present a better bite of the filament, as well as better control of retraction The replacement of this wheel normally requires a process of calibration of the...
Reference: RUAEXTIME
All-metal wheel for Titan extruder, of higher quality and stiffness than that included in some Titan extruders such as that of Artillery printers.
Reference: 6834898797346
Brand: Artillery 3D
Hotend Complete for Artillery X1(with smooth extruder lid) / X2 / Genius PRO/Genius. Includes: Barrel Smooth Bore 4.1 Heater Thermistor Silicone Case Brass nozzle 0.4mm * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTS014
Brand: Artillery 3D
Internal filament guide for extruder Titan clone. Compatible with extruders Titan of Artillery X1, X2, Genius or Genius PRO
Reference: 6834893940846
Brand: Makerex
Kit for Artillery X1/Genius/X2/Genius Pro: Heater Thermistor
Reference: 4025828567
Brand: E3D
This thermal paste is needed to transfer heat from the HeatBreak to the heatsink effectively. This 1 g envelope is the same one that comes with the HotEnd E3D kits and is perfect for helping the heatsink to dissipate excess heat. Composition: - 50% silicone compounds - Carbon compounds: 20% - Metal oxide compounds: 30% Please note: - The thermal composite...
Reference: PIDETIME
Metal sprocket for extruders Titan (e.g. Artillery X1, X2, Genius, Genius Pro). This part is made entirely of metal (
The nozzles Volcano are designed for use with blocks of type Volcano, this type of blocks allow a greater flow which allows a combination of speed-height of layer -nozzle size much higher than other nozzles of smaller size
Original article by E3D