Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
HeatBreak/Barrel to attach to the Block and to the heatsink of your hotend, select the appropriate type and model.
*All metal: the inlet teflon only reaches the top of the barrel, the rest of the way is through the metal interior of the barrel, it prevents the inlet teflon from touching the nozzle, making it suitable for high temperatures at which teflon can degrade. However, this type of barrel requires a few degrees higher temperature and is usually more prone to jamming
.*Bore 4.1: The inlet Teflon reaches the other end touching the nozzle. In this type of barrel, it is essential that the teflon is of quality if it is going to be printed at more than 230 degrees, as well as that the cut of the teflon is completely perpendicular to avoid gaps between it and the nozzle. Make sure when inserting the Teflon that it reaches the nozzle to avoid gaps
between the two.Material: Steel
Bottom Diameter: M6 threaded
Upper Diameter: M6 threaded
Length: 30mm
Non-original e3D item
No review at the moment
HeatBreak/Barrel to attach to the Block and to the heatsink of your hotend, select the appropriate type and model.
*All metal: the inlet teflon only reaches the top of the barrel, the rest of the way is through the metal interior of the barrel, it prevents the inlet teflon from touching the nozzle, making it suitable for high temperatures at which teflon can degrade. However, this type of barrel requires a few degrees higher temperature and is usually more prone to jamming
.*Bore 4.1: The inlet Teflon reaches the other end touching the nozzle. In this type of barrel, it is essential that the teflon is of quality if it is going to be printed at more than 230 degrees, as well as that the cut of the teflon is completely perpendicular to avoid gaps between it and the nozzle. Make sure when inserting the Teflon that it reaches the nozzle to avoid gaps
between the two.Material: Steel
Bottom Diameter: M6 threaded
Upper Diameter: M6 threaded
Length: 30mm
Non-original e3D item
