Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
Nozzles (nozzle) for 3D printers, valid for most printers and materials on the market.
See the description for the options to select
No review at the moment
Guy
MK8: Valid for printers with hotend MK8 (Ender 3, Ender 3 PRO, Ender 5, CR-10, Anet ET4, Anet A6, Anet A8, Geeetech A10)
Mk10: Valid for printers with hotend MK10 (Geeetech A10M, etc)
E3D: valid for hotends E3D and clones (Prusa Mk3, Anycubic Mega, Anycubic Chiron, etc.)
Volcano: valid for hotends E3D Volcano or compatible (Artillery X1, Artillery Genius)
Material
Brass: supplied with the printer, suitable for printing the most common materials (PLA, PETG, ABS, ETC). Exhibit better thermal conductivity than steel nozzles
Stainless steel: suitable for printing objects that will be in contact with food or with the mouth or respiratory tract as it does not contain lead.
Hardened steel: suitable for printing with materials containing chips of hard materials such as carbon fiber, metal, etc. It will last longer with these materials than a standard brass mouthpiece.
Size
<0.4mm: suitable for maximum detail at the cost of increased print times
0.4mm: most common size, with a good compromise between print time and detail
0.5-0.6mm: nozzles commonly used to gain printing speed without a great loss of detail, also used for materials with large traces such as wood filament.
>0.6mm: Used for large prints, the loss of detail is noticeable. For these sizes it is advisable to have a hotend Type Volcano, as the amount of material to be melted per second can be too much for a hotend normal.
For materials that contain traces of hard materials such as metals, carbon fiber, etc., the use of hardened steel nozzles is recommended.
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: REF000544AC
Precision-machined nozzles with a sharp tip. Some models have the size coding by dots on the head, being the coding 3 points: 0.4mm 4 points: 0.6mm 5 points: 0.8mm 0 points: 1mm * Price per unit
Reference: REF000545AC
Precision-machined nozzle with a sharp tip. Compatible V6 and V5 models * Price per unit
Nozzles (nozzle) for 3D printers, valid for most printers and materials on the market.
See the description for the options to select
