Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market.
See in the description the opti
Read the review
Guy
MK8: Valid for printers with hotend MK8 (Ender 3, Ender 3 PRO, Ender 5, CR-10, Anet ET4, Anet A6, Anet A8, Geeetech A10)
Mk10: Valid for printers with hotend MK10 (Geeetech A10M, etc)
E3D: valid for hotends E3D and clones (Prusa Mk3, Anycubic Mega, Anycubic Chiron, etc.)
Volcano: valid for hotends E3D Volcano or compatible (Artillery X1, Artillery Genius)
Material
Brass: supplied with the printer, suitable for printing the most common materials (PLA, PETG, ABS, ETC). Exhibit better thermal conductivity than steel nozzles
Stainless steel: suitable for printing objects that will be in contact with food or with the mouth or respiratory tract as it does not contain lead.
Hardened steel: suitable for printing with materials containing chips of hard materials such as carbon fiber, metal, etc. It will last longer with these materials than a standard brass mouthpiece.
Size
<0.4mm: suitable for maximum detail at the cost of increased print times
0.4mm: most common size, with a good compromise between print time and detail
0.5-0.6mm: nozzles commonly used to gain printing speed without a great loss of detail, also used for materials with large traces such as wood filament.
>0.6mm: Used for large prints, the loss of detail is noticeable. For these sizes it is advisable to have a hotend Type Volcano, as the amount of material to be melted per second can be too much for a hotend normal.
For materials that contain traces of hard materials such as metals, carbon fiber, etc., the use of hardened steel nozzles is recommended.
Reference: 8434000004157
Brand: SmartMaterials
SMARTFIL PLA: It is a biodegradable filament for all printers, with which we can print easily, since it has no contractions, thus allowing us to manufacture large parts. With our PLA filament you can achieve a great finish and bright colors in our pieces.
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000556
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: REF000700C401A
Pneumatic connector for the Teflon tube of your 3D printer. Select the correct version, the brass version does not allow Teflon to pass through, acting as a terminal, the steel version does allow the passage.
Reference: REF000628B
0 review
Aluminum block for the MK8 hotend model. Does not include thermistor, heater or heatbreak. Includes screws
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: 573-1261
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the options to select
Reference: ARTW007
Brand: Artillery 3D
0 review
PCB Board for X-Axis Artillery Genius / Genius PRO / X2 Compatible with 31mm and 21mm girdle (24 pins) Not vali
Reference: 6834898797346
Brand: Artillery 3D
Hotend Complete for Artillery X1(with smooth extruder lid) / X2 / Genius PRO/Genius. Includes: Barrel Smooth Bore 4.1 Heater Thermistor Silicone Case Brass nozzle 0.4mm * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTZ082
Brand: Artillery 3D
0 review
Mechanical limit limit sensor for Artillery X2/Genius Pro Hornet, valid for X1 or Genius (needs a new screw 4 mm longer)
Reference: ARTZ051
Brand: Artillery 3D
0 review
Flexible steel strip coated with textured PEI on one side and polished steel on the other, valid as a printing surface. A str
5
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market.
See in the description the opti
