Reference: 8430095626656

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.25
More
In stock

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock

Reference: REF000081R

Teflon tube

This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm

From Price €0.30
More
In stock
All best sellers
  • Banner

High Quality V5/V6 Nozzle (Steel, brass, etc.)

REF000545AC

Precision-machined nozzle with a sharp tip. Compatible V6 and V5 models

* Price per unit

Caliber
Hot-End Nozzle Type
Nozzle Size
Material
€3.95
Tax included Shipping excluded
Quantity

rating Read the review
Average rating: 5/5 Number of reviews: 1
Description

Material

Brass: supplied with the printer, valid for printing the most common materials (PLA, PETG, ABS, ETC). They have better thermal conductivity than steel nozzles

Stainless steel: suitable for printing objects that will be in contact with food or with the mouth or respiratory tract since it does not contain lead.

Hardened steel: suitable for printing with materials that contain chips from hard materials such as carbon fiber, metal, etc. Their lifespan with these materials will be longer than a standard brass nozzle.

Silver Copper: suitable for printing at high temperature (>300º) supporting up to 500º, its outer nickel coating prevents the material from adhering to the nozzle. They have up to 3 times higher thermal conductivity than brass nozzles, as well as twice the hardness, so they perform better than brass nozzles even for printing common materials such as PLA, PETG, ABS

, etc.

Size

<0.4mm: suitable for maximum detail at the expense of increased printing times

0.4mm: most common size, with a good compromise between printing time and detail

0.5-0.6mm: nozzles commonly used to increase printing speed without a great loss of detail, also used for materials with large traces such as wood filament.

>0.6mm: used for large prints, the loss of detail is notable. For these sizes, it is recommended to have a volcano-type hotend, since the amount of material to be melted per second can be too much for a normal hotend

.

For materials that contain traces of hard materials such as metals, carbon fiber, etc., the use of hardened steel nozzles is recommended.

Product Details
REF000545AC
You might also like

Reference: CEALBLA18

18cm Metallic Brush

Don't you know how to clean the hotend of those damn scraps of material? , with a brush with metal bristles you will be able to remove most of the debris that remains on your hotend. Perform the cleaning with the pre-heated hotend It is recommended to turn off the printer or at least not be heating the hotend when using the brush to avoid a possible short...

Price €1.95
More
In stock

Reference: BLV6COEN

Hotend V6 Copper Plated Block

rating 0 review

These blocks are designed for maximum performance at high temperatures. Made of a special high-temperature copper alloy with a softening point of more than 500 °C (compared to aluminum blocks that lose integrity after 350 °C) and higher thermal conductivity, these copper blocks are ideal for high-temperature applications during processing. Perfect for...

From Price €4.95
More
Out of stock
componentes
rating 5
02/25/2021
nofre524
llego equivocado pero al ponerme en contacto al dia siguiente ya estaba aqui la correspondiente,muy buen servicio