- Out of stock

Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
This thermal paste is needed to transfer heat from the HeatBreak to the heatsink effectively.
This 1 g envelope is the same one that comes with the HotEnd E3D kits and is perfect for helping the heatsink to dissipate excess heat.
Composition:
- 50% silicone compounds
- Carbon compounds: 20%
- Metal oxide compounds: 30%
Please note:
- The thermal composite paste should only be used on the long section of the barrel
***Original item from E3D
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000556
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: REF000644
Teflon tube cutter with sturdy ABS body. Suitable for cutting flexible plastic tubes. Cutting with this tool ensures that the tube is not crushed during cutting, as well as a perpendicular cut, which will avoid jamming problems. WARNING: The color supplied may not match the one shown in the photo
Reference: 6834892538792
Heatbreak or barrel high-quality "all metal" type in which the Teflon inlet only reaches the top of thebarrel, the rest of the route is carried out through the metal interior of the barrel, prevents the input Teflon from touching the nozzle so it is suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few...
Reference: 6834895210152
Heatbreak or barrel High quality type all metal in the Teflon input only reaches the top of thebarrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few degrees more...
Reference: ARTJ024
Compatible Aluminum Block E3D Volcano, requires nozzle Volcano What's not included thermistor, heater or heatbreak/barrel. Includes hardware Valid for Artillery Genius, X1, Genius PRO, X2
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: TTBRTIT
Brand: Makerex
Metal arm for the original extruder of the printers Artillery X1 and Artillery Genius or for any Titan type extruder Incorporates sprocket for better filament traction
Reference: REF000544AC
Precision-machined nozzles with a sharp tip. Some models have the size coding by dots on the head, being the coding 3 points: 0.4mm 4 points: 0.6mm 5 points: 0.8mm 0 points: 1mm * Price per unit
Reference: RUDETIME
High-quality sprocket for extruder Titan. This part has a much more precise and deep machining than that usual in extruders Titan as standard printers Artillery, these characteristics make it present a better bite of the filament, as well as better control of retraction The replacement of this wheel normally requires a process of calibration of the...
Reference: RUAEXTIME
All-metal wheel for Titan extruder, of higher quality and stiffness than that included in some Titan extruders such as that of Artillery printers.
Reference: 6834895663446
Heatbreak or barrel High quality type all metal in the Teflon input only reaches the top of thebarrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few degrees more...
Reference: 6834893940846
Brand: Makerex
Kit for Artillery X1/Genius/X2/Genius Pro: Heater Thermistor
Reference: 4025828682
Brand: E3D
The nozzles Volcano are designed for use with blocks of type Volcano, this type of blocks allow a greater flow which allows a combination of speed-height of layer -nozzle size much higher than other nozzles of smaller size Original article by E3D
Reference: ARTJ054
Brand: Artillery 3D
Metal extruder cover with integrated heatsink for improved thermal transfer for printers Artillery X1 / X2 / Genius / Genius PRO. Valid for barrels/heatbreaks type Kraken (plain)
This thermal paste is needed to transfer heat from the HeatBreak to the heatsink effectively.
This 1 g envelope is the same one that comes with the HotEnd E3D kits and is perfect for helping the heatsink to dissipate excess heat.
Composition:
- 50% silicone compounds
- Carbon compounds: 20%
- Metal oxide compounds: 30%
Please note:
- The thermal composite paste should only be used on the long section of the barrel
***Original item from E3D