Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts.
-Does not leave residues
-purity >99.5% isopropyl alcohol. It is NOT a dissolution
-Slightly soluble in water
Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.
3DLAC SPRAY 400ml
- STRONG AND LONG-LASTING ADHESION
- EXTENDED DURABILITY (APPROX. 400 APPLICATIONS)
- NO WARPING
Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors.
3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm)
High quality Teflon tube, with very low friction and high temperature resistance.
Capricorn XS vs TL...
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm)
Generic Teflon Tube
Inner Diameter (ID): 1.9mm ± 0.15mm
Outer Diameter (OD): 4.0mm
INNOVATEFIL PAHT CF: PA 85% + CF15% It is a filament with great mechanical resistance and excellent performance at high temperatures. The mixture of polyamides and carbon fibre allows large, deformation-free and extremely strong objects to be printed, and makes the filament increase in strength and rigidity. The incorporation of carbon fiber increases electrical conductivity, making it suitable for conductive and dissipative applications.
nnovatefil Polyamide® HT with Carbon Fiber (PAHT FC) PA 85% + CF15% is a filament with great mechanical resistance and excellent performance at high temperatures. The mixture of polyamides and carbon fibre allows large, deformation-free and extremely strong objects to be printed, and makes the filament increase in strength and rigidity. This filament is especially suitable for professional users who require extra quality in their prints and is mainly intended for pieces that are going to have an end or direct use.
Among its main advantages are the ability to work at temperatures of 150oC, it also has a great adhesion between layers which provides the printed part with great resistance regardless of the printing position. The incorporation of carbon fiber increases electrical conductivity, making it suitable for conductive and dissipative applications.
RECOMMENDATIONS FOR THE USE OF CARBON FIBER
Carbon fiber makes this filament very abrasive, so it is necessary to use hardened steel nozzles or similar to print, in order to avoid premature wear of the components
To achieve a better finish and avoid printing problems, it is recommended to use 0.6 mm diameter nozzles and print layer height of 0.2 mm or higher. Failure to follow these recommendations can cause nozzle clogging problems.
KEEP THE EXTRUDER IN GOOD CONDITION
Once printing is complete, it is necessary to clean the nozzle by removing excess material to avoid unwanted fillings and defects. If multiple materials are used, it is advisable to have a nozzle for each material to avoid unwanted mixing.
We recommend the use of Smartfil CLEAN for extruder cleaning
INNOVATEFIL PAHT CF: PA 85% + CF15% It is a filament with great mechanical resistance and excellent performance at high temperatures. The mixture of polyamides and carbon fibre allows large, deformation-free and extremely strong objects to be printed, and makes the filament increase in strength and rigidity. The incorporation of carbon fiber increases electrical conductivity, making it suitable for conductive and dissipative applications.
No review at the moment
