
Reference: 8430095616954
Brand: Nazza
Nazza Isopropyl Alcohol
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
PETG filament with carbon fiber, carbon fiber improves the already excellent properties of PETG, increasing its rigidity and impact resistance
The Filament PETG (polyethylene terephthalate) is a plastic yarn that combines the properties of filament ABS (solid, temperature-resistant, extremely durable) and filament PLA (easy to print). Because of these properties, the PETG is a filament material for 3D printing that you must have on your bookshelf. It is eco-friendly and can be recycled after use. Precisely because of its excellent chemical stability, the PETG it is a material that complies with all the requirements of the European Parliament and the Council on man-made substances in contact with foodstuffs and medicines.
The Filament PETG It is extremely durable, solid and odorless. It is an excellent filament that combines strength and flexibility, which is why it is used to print mechanical products or in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a glossy finish and is therefore also used for the printing of decorative elements.
For good results, you need to print at a temperature of 220-230°C, and the printing table should be heated to 80-90°C. It should be noted that the temperature range of the printing media may vary slightly depending on the use of other printers.
* This product can be supplied in recycled cardboard reel or plastic either
Data sheet
Specific References
Manufacturer: Eryone
PETG filament with carbon fiber, carbon fiber improves the already excellent properties of PETG, increasing its rigidity and impact resistance