Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
The filament PLA (polylactic acid) for 3D printing is a versatile and easy-to-use material in 3D printing. The filament of PLA It is bioplastic, which means it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially compared to petrochemical alternatives (e.g. ABS). For good results, it is necessary to print at a temperature of 190-210 ° C and the printing table should be heated to 50-60 ° C. Keep in mind that the temperature range of the printing media may vary slightly depending on the use of other printers
The filament PLA for printers is specially designed to make it easy to use for beginners. It is a good material because it has excellent properties and does not shrink when printing. In addition, it adapts very well to the printing table. The filament ABS It's a great alternative, but it shrinks, so you'll have more trouble with the grip of the filament on the printing table. The filament of PLA It is a material that is distinguished by a glossy finish and is therefore also used for printing decorative elements.
The filament PLA it is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Byte Bits, Airwolf3D, Makergear, Printrbot, Bukobot, type A machines and many more.
The 3D printing filament PLA is the best-selling product of the 3D filaments used for 3D printing with good reason as it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a hot table when printing.
No review at the moment
Data sheet
Specific References
Manufacturer: AzureFilm
The filament PLA (polylactic acid) for 3D printing is a versatile and easy-to-use material in 3D printing. The filament of PLA It is bioplastic, which means it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially compared to petrochemical alternatives (e.g. ABS). For good results, it is necessary to print at a temperature of 190-210 ° C and the printing table should be heated to 50-60 ° C. Keep in mind that the temperature range of the printing media may vary slightly depending on the use of other printers
The filament PLA for printers is specially designed to make it easy to use for beginners. It is a good material because it has excellent properties and does not shrink when printing. In addition, it adapts very well to the printing table. The filament ABS It's a great alternative, but it shrinks, so you'll have more trouble with the grip of the filament on the printing table. The filament of PLA It is a material that is distinguished by a glossy finish and is therefore also used for printing decorative elements.
The filament PLA it is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Byte Bits, Airwolf3D, Makergear, Printrbot, Bukobot, type A machines and many more.
The 3D printing filament PLA is the best-selling product of the 3D filaments used for 3D printing with good reason as it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a hot table when printing.
