Brands
Best Sellers
Nazza Isopropyl Alcohol Quick view

Reference: 8430095626656

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.25
More
In stock
Teflón Capricorn Premium XS Quick view

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock
Teflon tube Quick view

Reference: REF000081R

Teflon tube

Generic Teflon tube Inner diameter (ID): 1.9mm ± 0.15mm Outer diameter (OD): 4.0mm You can adjust the desired length, adding as many 10cm units as you want. We will supply the tube continuously for lengths less than 2m.

From Price €0.30
More
In stock
All best sellers

  • Banner

Dimafix Pen

8436556020025

Dimafix is a spray or pen fixer intended for use in 3D printers with FDF technology and a heated bed.

  • It provides a strong adhesion of plastic to glass, eliminating warping even on large parts printed on ABS.
  • Possibility to print on all types of materials that require a thermal bed.
  • Adhesion activated with temperature.
  • The adhesive effect does not degrade, it remains intact during very long prints.
  • Cooling the base below 40-50ºC makes the adhesion disappear, so the part peels off automatically.
  • Easy cleaning of the fastener since it is soluble in water.
  • Long life from a single pot.

The goal of Dimafix is to facilitate quality 3D printing with all types of materials.

With a light spray of Dimafix on the hot printing base, in the area where the first printed layers of any material are going to be printed, they are fixed in an effective way, avoiding unwanted faults or so-called warping, lifting of the sides of the part. After finishing printing and with the cold base, the removal of the pieces is automatic. They can be easily and gently removed without the need for auxiliary elements such as spatulas or other tools that could damage

the part.
€14.52
Tax included Shipping excluded
Quantity

rating No review at the moment
Description

The goal of Dimafix is to facilitate quality 3D printing with all types of materials.

With a light spray of Dimafix on the hot printing base, in the area where the first printed layers of any material are going to be printed, they are fixed in an effective way, avoiding unwanted faults or so-called warping, lifting of the sides of the part. After finishing printing and with the cold base, the removal of the pieces is automatic. They can be easily and gently removed without the need for auxiliary elements such as spatulas or other tools that could damage

the part.
Product Details
8436556020025