Brands
Best Sellers
Nazza Isopropyl Alcohol Quick view

Reference: 8430095616954

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.70
More
In stock
Teflón Capricorn Premium XS Quick view

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock
Teflon tube Quick view

Reference: REF000081R

Teflon tube

This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm

From Price €0.30
More
In stock
All best sellers

  • Banner

Heatbreak V6 Kraken Steel

ARTJ055

*All metal: the input Teflon only reaches the top of the barrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. However, this type of barrel It requires a few degrees more temperature and is usually more prone to clogging.

*Bore 4.1: The input Teflon reaches the other end by touching the nozzle. In this type of barrel It is essential that the Teflon is of quality if it is going to be printed at more than 230 degrees, as well as that the cut of the Teflon is completely perpendicular to avoid gaps between it and the nozzle. Make sure when inserting the Teflon that it reaches the nozzle to avoid gaps between the two.

Valid for Artillery Genius/X1 with smooth extruder cover, Anet et4, CR10, Ender 3, etc.

Material: Steel

Bottom Diameter: Threaded M6

Top Diameter: Threaded M7

Length: 20.9mm

Non-original article E3D

Caliber
Heat Break Type
€2.45
Tax included Shipping excluded
Quantity

rating Read the 7 reviews
Average rating: 5/5 Number of reviews: 7
Product Details
ARTJ055
You might also like
Teflón Capricorn Premium XS Quick view

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock
Teflon Tube Cutter Quick view

Reference: REF000644

Teflon Tube Cutter

Teflon tube cutter with sturdy ABS body. Suitable for cutting flexible plastic tubes. Cutting with this tool ensures that the tube is not crushed during cutting, as well as a perpendicular cut, which will avoid jamming problems. WARNING: The color supplied may not match the one shown in the photo

Price €2.95
More
In stock
Teflon tube Quick view

Reference: REF000081R

Teflon tube

This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm

From Price €0.30
More
In stock
Pneumatic connector (Teflon) Quick view

Reference: REF000700C401A

Pneumatic connector (Teflon)

Pneumatic connector for the Teflon tube of your 3D printer. Select the correct version, the brass version does not allow Teflon to pass through, acting as a terminal, the steel version does allow the passage.

From Price €1.50
More
In stock
Heatbreak V6 Kraken Bi-Metal Quick view

Reference: 6834895210152

Heatbreak V6 Kraken Bi-Metal

Heatbreak or barrel High quality type all metal in the Teflon input only reaches the top of thebarrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few degrees more...

From Price €14.94
More
In stock
Filter reviews
(7)
(0)
(0)
(0)
(0)
(0)
Reset

ok
rating 5
02/04/2023
Juan Luis
ok
Buena calidad
rating 5
05/25/2022
Tony
Nunca lo había probado este modelo y perfecto, no cambio más a otro modelo.
Todo correcto
rating 5
04/30/2022
Toni
Perfecto
Perfecto.
rating 5
04/24/2022
elef
Recambio idéntico para tu Artillery.
Recambio bueno y asequible.
rating 5
02/14/2022
Kerky
Buena calidad y entrega rápida como siempre. Gracias, MakerEX
A mi me da problemas, pero supongo que depende de
rating 5
02/14/2022
Kerky
Buena calidad y entrega rápida como siempre. Gracias, MakerEX
Perfectos y buenos
rating 5
04/13/2022
TONI Naranjo
Calidad buena, recomendados, y la atención al cliente de 10. La mejor web sin duda. Gracias!