
Reference: 8430095616954
Brand: Nazza
Nazza Isopropyl Alcohol
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market.
See in the description the options to select
Guy
MK8: Valid for printers with hotend MK8 (Ender 3, Ender 3 PRO, Ender 5, CR-10, Anet ET4, Anet A6, Anet A8, Geeetech A10)
Mk10: Valid for printers with hotend MK10 (Geeetech A10M, etc)
E3D: valid for hotends E3D and clones (Prusa Mk3, Anycubic Mega, Anycubic Chiron, etc.)
Volcano: valid for hotends E3D Volcano or compatible (Artillery X1, Artillery Genius)
Material
Brass: supplied with the printer, suitable for printing the most common materials (PLA, PETG, ABS, ETC). Exhibit better thermal conductivity than steel nozzles
Stainless steel: suitable for printing objects that will be in contact with food or with the mouth or respiratory tract as it does not contain lead.
Hardened steel: suitable for printing with materials containing chips of hard materials such as carbon fiber, metal, etc. It will last longer with these materials than a standard brass mouthpiece.
Size
<0.4mm: suitable for maximum detail at the cost of increased print times
0.4mm: most common size, with a good compromise between print time and detail
0.5-0.6mm: nozzles commonly used to gain printing speed without a great loss of detail, also used for materials with large traces such as wood filament.
>0.6mm: Used for large prints, the loss of detail is noticeable. For these sizes it is advisable to have a hotend Type Volcano, as the amount of material to be melted per second can be too much for a hotend normal.
For materials that contain traces of hard materials such as metals, carbon fiber, etc., the use of hardened steel nozzles is recommended.
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000556
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: REF000111
kit of 10 drill bits for cleaning and eliminating nozzle jams. Preheat the nozzle before use. Available in different sizes: 0.4, 0.6, 0.8 and Mix (0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2).
Reference: REF000554
BMG clonic extruder, with its double gear and its 3:1 gear ratio, provides greater traction torque of the filament at equal motor power. The filament path is fully guided throughout the body of the extruder and the housing maintains tight tolerances to the drive gears, mitigating the possibilities of filament jamming when the hotend experiences increased...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: ARTJ055
*All metal: the input Teflon only reaches the top of the barrel, the rest of the route is done through the metal interior of
Reference: REF000612A
E3D V6 compatible aluminum block. Screw for M6 barrel Does not include thermistor, heater or heatbreak. Includes screws Dimensions: Package: 16 x 11 x 23 mm (for thermistor package 3 x 15 mm) Not Encapsulated: 16x12x20
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: 575-1317
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: BLV6COEN
These blocks are designed for maximum performance at high temperatures. Made of a special high-temperature copper alloy with a softening point of more than 500 °C (compared to aluminum blocks that lose integrity after 350 °C) and higher thermal conductivity, these copper blocks are ideal for high-temperature applications during processing. Perfect for...
Reference: ARTW007
Brand: Artillery 3D
PCB Board for X-Axis Artillery Genius / Genius PRO / X2 Compatible with 31mm and 21mm girdle (24 pins) Not vali
Reference: REF000544AC
Precision-machined nozzles with a sharp tip. Some models have the size coding by dots on the head, being the coding 3 points: 0.4mm 4 points: 0.6mm 5 points: 0.8mm 0 points: 1mm * Price per unit
Reference: REF000545AC
Precision-machined nozzle with a sharp tip. Compatible V6 and V5 models * Price per unit
Reference: 6834898797346
Brand: Artillery 3D
Hotend Complete for Artillery X1(with smooth extruder lid) / X2 / Genius PRO/Genius. Includes: Barrel Smooth Bore 4.1 Heater Thermistor Silicone Case Brass nozzle 0.4mm * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTZ087
Brand: Artillery 3D
Touch-type self-calibrating sensor, unlike inductive sensors, it can work on any type of printing surface: metal, plastic, glass, etc. Standard replacement for Artillery X2 / Genius PRO
Reference: ARTZ082
Brand: Artillery 3D
Mechanical limit limit sensor for Artillery X2/Genius Pro Hornet, valid for X1 or Genius (needs a new screw 4 mm longer)
Reference: ARTZ051
Brand: Artillery 3D
Flexible steel strip coated with textured PEI on one side and polished steel on the other, valid as a printing surface. A str
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market.
See in the description the options to select