Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
3DLAC SPRAY 400ml
- STRONG AND LONG-LASTING ADHESION
- EXTENDED DURABILITY (APPROX. 400 APPLICATIONS)
- NO WARPING
Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors.
3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy application.
A light 3DLAC spray on the surface is sufficient to fully support the first layer of plastic at the base.
Thanks to the properties of 3DLAC, while the base is hot, the extruded plastic is firmly stuck.
Once the printed part has cooled down, it can be removed without problems and without damage.
3D LAC IS SUITABLE FOR ALL TYPES OF MATERIALS.
Read the 2 reviews
HOW TO USE
Vaporize the spray fixer 3DLAC on the basis of printing at a distance of 20 cm. As long as the temperature of the base is high, the piece will remain compactly adhered and without moving. Once the printing is finished, wait until the heated base is below 30oC, the adhesion will be lighter and without the need for tools (depending on the characteristics and dimensions of the piece) the piece can be removed smoothly and without damage.
Manufacturer: 3dlac
Reference: 8411322240500
Brand: 3dlac
0 review
- STRONG AND LASTING ADHESION - LONG DURABILITY (400 APPLICATIONS APPROX.) -NO WARPING 3DLAC PLUS IS SUI
Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: 575-1317
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
5
5
3DLAC SPRAY 400ml
- STRONG AND LONG-LASTING ADHESION
- EXTENDED DURABILITY (APPROX. 400 APPLICATIONS)
- NO WARPING
Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors.
3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy application.
A light 3DLAC spray on the surface is sufficient to fully support the first layer of plastic at the base.
Thanks to the properties of 3DLAC, while the base is hot, the extruded plastic is firmly stuck.
Once the printed part has cooled down, it can be removed without problems and without damage.
3D LAC IS SUITABLE FOR ALL TYPES OF MATERIALS.
