Reference: 8430095626656

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.25
More
In stock

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock

Reference: REF000081R

Teflon tube

This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm

From Price €0.30
More
In stock
All best sellers
  • Banner

  • Out of stock

Artillery Genius Pro

6L-8FM6-L5FP

An improved version of its successful predecessor, the Artillery Genius, this new printer has features very similar to its previous model but offers us several new features that will make this a very good option to become your new printer.

The two main improvements are the inclusion of a new 32-bit Ruby board and the built-in calibration sensor, besides Artillery has incorporated minor improvements and changes aimed at increasing reliability.

€295.00
Tax included Shipping excluded
Quantity
Out of stock

rating No review at the moment
Description

***Print surface: 22x22x25***

-Ultra-quiet stepper controllers

-Synchronized Dual Z system: ensures parallelism between the horizontal axis and the printing surface

-Titan type direct-drive extruder, makes your printer more reliable, especially for flexible filaments.

-220v “Ultrabase” heating base type “Ultrabase” and ceramic glass for fast heating.

-Protection against power outages: Continue printing from the position where the last printing stopped during the power failure, and you can stop continuous operation or turn off.

-Filament sensor: the printer detects the absence of filament, pausing printing.

-Resumption in the event of a power cut

-Touchscreen

-Built-in calibration sensor

-Ultra-solid structure in 40x40 aluminum profiles

-Inductive axle stop sensors

-Pre-assembled, it can be assembled in just a few minutes.

-32-bit Ruby board

-Volcano-type nozzle (allows the use of nozzles larger than 0.6mm in size with layer height greater than 0.48mm without slowing down)

-Layer resolution from 0.05 mm

-Maximum printing speed 150mm/s It is recommended to print around 60 mm/s

-Maximum travel speed 250mm/s

-Filament diameter 1.75mm

-Supported filament PLA filament, ABS, Flexible filament, TPU, wood, PVA, HIPS...

-Nozzle diameter 0.4 mm

-Nozzle temperature up to 240°C

-Noise level <70 dBA

-Power consumption 240V 600W max (with heated bed on)

-Weight of the machine 8.9kg

-Dimensions of the machine 430 x 390 x 590mm

-Dimensions of the shipping box 535 x 435 x 320mm

Product Details
6L-8FM6-L5FP

Data sheet

Printing surface
Small (15 to 25cm)
Extrusion Type
Direct
casing
Open
Self-Leveling Sensor
Fixed