Filter By
Categories
Categories
Brand
Brand
Price
Price
€1.00 - €80.00
There are 37 products.
Reference: 2150
Brand: Prusa
0 review
Steel spring sheet with PEI powder coating textured on both sides. Although the foil has a MK3 print, it is also compatible with newer printers, such as the MK4/S.
Reference: 6971636402961
Brand: Creality
0 review
One of the main issues affecting print quality is moisture in the filament. All the materials available for 3d printing absorb moisture over time, some to a greater extent such as nylon or PVA, otros to a lesser extent such as ABS. A wet filament decreases print quality by generating steam during the filament's passage through the nozzle, causing...
Reference: FUNNECOM
Brand: Prusa
0 review
Silicone sock for the set of Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9 *Non-original product Prusa
Reference: PJ132
Brand: Creality
0 review
Kit for upgrading the hotend Valid for Creality K1, K1 Max and CR-M4. Unlike the original kit, this kit uses a standard MK8 nozzle and features an easily replaceable ceramic heater and thermistor. According to the manufacturer's data, it provides 50% more flow than the hotend additional.
Reference: B02343
Brand: Creality
0 review
Nozzle compatible with printers - Creality: K1 / CR-M4 / Ender 3 Ke - Anycubic : Vyper, Kobra Price per unit.
Reference: 1794
Brand: Prusa
0 review
Silicone sock for the set of the Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9
Reference: 1781
Brand: Prusa
0 review
Aluminum block for the whole of the Hotend dedicated to printers that use Nextruder: XL, MK4, MK3.9
Reference: 1780
Brand: Prusa
0 review
Replacement 40W-120mm heater (with bend) for the Nextruder for Prusa XL This heater is compatible with PRUSA XL
Reference: 1779
Brand: Prusa
0 review
Replacement 40W-120mm heater for the Nextruder for Prusa XL This heater is compatible with PRUSA MK4
Reference: 1778
Brand: Prusa
0 review
Thermistor (Temperature Sensor) NTC 100k - 90 mm spare for the Nextruder. Supports Prusa MK4
Reference: 10601-000720
Brand: Prusa
0 review
Thermistor (Temperature Sensor) NTC 100k - 115 mm spare for the Nextruder. Supports Prusa XL
Reference: 1776-3551
Brand: Prusa
0 review
2The ObXidian nozzle is a high-quality nozzle designed specifically for the Nextruder. It is made of hardened steel with a corrosion-resistant treatment, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials such as carbon fiber, as they maintain their hardness even at higher...
Reference: 1775
Brand: Prusa
0 review
In case you want to use your V6 nozzle on the Nextruder, install it in conjunction with this nozzle adapter. This product includes: Adapter Nextruder to V6 nozzle (1x) *V6 nozzle is not included
Reference: 1774-3542
Brand: Prusa
0 review
For the next generation of printers Prusa Special nozzles with an all-metal filament guide are used. This means that the entire filament path through the Nextruder it's all-metal, with no PTFE tubing anywhere. This improves the overall reliability of the printer and makes changing nozzles much faster. Nozzle valid for the following printers: Prusa MK3.9,...
Reference: 7866-000568
Brand: Prusa
0 review
This product is the replacement fuser fan. It is only compatible with the MK3/S/+. The Rambo of the MK2.5/S requires V-cable adapter, the fan can NOT be connected to the Rambo of the MK2.5/S directly. Supports: Prusa MK3/S/+ , MK2 and MK2.5 Specs: - Voltage: 5v - Format 4010
