Teflon tube

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

9 reviews

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Reference: REF000556

Hotend silicone covers

3 reviews

Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...

Reference: REF000111

Kit 10 Cleaning bits

0 review

kit of 10 drill bits for cleaning and eliminating nozzle jams. Preheat the nozzle before use. Available in different sizes: 0.4, 0.6, 0.8 and Mix (0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2).

Reference: REF000606

Nozzle Cleaning Needles (10 units)

8 reviews

Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles

Reference: ARTD012

Brand: Artillery 3D

Heater Hotend Artillery X1/Genius

5 reviews

Original heater for the hotend of your Artillery X1 or Artillery Genius.24V, 64W, VH3.96 Terminal

Reference: ARTD013

Brand: Artillery 3D

Temperature Sensor Hotend Artillery X1/Genius/x2/Genius Pro

8 reviews

Temperature Sensor (Thermistor) original for Artillery X1/Genius/x2/Genius Pro Connector-XH2.54, length 80mm, head diameter 3mm Photo shown for illustrative purposes, product may not correspond exactly as Artillery It supplies sensors that, while they are all compatible, are not aesthetically the same.

Reference: REF000644

Teflon Tube Cutter

3 reviews

Teflon tube cutter with sturdy ABS body. Suitable for cutting flexible plastic tubes. Cutting with this tool ensures that the tube is not crushed during cutting, as well as a perpendicular cut, which will avoid jamming problems. WARNING: The color supplied may not match the one shown in the photo

Reference: REF000691

Cable Cover

1 review

Material: Nylon Length: 1 meter Diameter: 6mm, 10mm, 15mm, 20mm. Braided cable. Strong corrosion resistance Color: Black

Reference: REF000700C401A

Pneumatic connector (Teflon)

3 reviews

Pneumatic connector for the Teflon tube of your 3D printer. Select the correct version, the brass version does not allow Teflon to pass through, acting as a terminal, the steel version does allow the passage.

Reference: 6834897089350

Cutting Pliers

1 review

Cutting pliers, ideal for cutting filament. *The model supplied may not correspond exactly (color, shape of the handle, etc.) to the one shown in the photo

Reference: 6834895210152

Heatbreak V6 Kraken Bi-Metal

6 reviews

Heatbreak or barrel High quality type all metal in the Teflon input only reaches the top of thebarrel, the rest of the route is done through the metal interior of the barrel, prevents the inlet Teflon from touching the nozzle making it suitable for high temperatures at which Teflon can degrade. This type of barrel It may require a few degrees more...

Reference: 572-1205

Volcano Nozzle (Steel, brass, etc.)

10 reviews

Nozzles (nozzle) for 3D printers, valid for most printers and materials on the market. See the description for the options to select

Reference: 573-1261

V5/V6 nozzle (Steel, brass, etc.)

2 reviews

Nozzles (nozzle) for 3D printers, valid for most printers and materials on the market. See the description for the options to select

Reference: 575-1317

MK8 Nozzle (Steel, Brass, etc.)

1 review

Nozzles (nozzle) for 3D printers, valid for most printers and materials on the market. See the description for the options to select