Reference: 8430095616954

Brand: Nazza

Nazza Isopropyl Alcohol

Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.

From Price €5.70
More
In stock

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock

Reference: REF000081R

Teflon tube

Generic Teflon tube Inner diameter (ID): 1.9mm ± 0.15mm Outer diameter (OD): 4.0mm You can adjust the desired length, adding as many 10cm units as you want. We will supply the tube continuously for lengths less than 2m.

From Price €0.30
More
In stock
All best sellers
  • Banner

Heatbreak V6 Kraken Titanium

6834895663446

Heatbreak or barrel of high quality all metal type in the inlet teflon only reaches the top of the barrel, the rest of the journey is through the metal interior of the barrel, it prevents the inlet teflon from touching the nozzle, making it suitable for high temperatures at which teflon can degrade. This type of barrel may require a few degrees higher temperature and is usually more prone to jamming than a Bore type heatbreak

.

Titanium improves heat evacuation over a steel heatbreak, which means greater temperature differences between the block and the heatsink. Since it does not have parts made of different materials such as a bimetal barrel, it has greater durability (but a worse thermal conductivity

)

Valid for Artillery Genius/X1 with smooth extruder cover, anet et4, CR10, Ender 3, etc.

Material: titanium

Bottom Diameter: M6 threaded

Upper Diameter: M7 plain

Length: 20.9mm

*Recommended to use thermal paste at the junction with the heatsink

**Non-original e3D item

Caliber
Heat Break Type
€16.95
Tax included Shipping excluded
Quantity

rating Read the review
Average rating: 5/5 Number of reviews: 1
Product Details
6834895663446

Specific References

ean13
6834895663446
You might also like

Reference: CAPPTFETL

Brand: Capricorn

Teflón Capricorn Premium XS

This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...

Price €1.82
More
In stock

Reference: REF000556

Hotend silicone covers

Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...

From Price €1.95
More
In stock

Reference: 4025828567

Brand: E3D

E3D Thermal Paste (1g)

This thermal paste is needed to transfer heat from the HeatBreak to the heatsink effectively. This 1 g envelope is the same one that comes with the HotEnd E3D kits and is perfect for helping the heatsink to dissipate excess heat. Composition: - 50% silicone compounds - Carbon compounds: 20% - Metal oxide compounds: 30% Please note: - The thermal composite...

Price €0.73
More
Out of stock
Se acabaron los atascos
rating 5
11/26/2022
Ballejals
Si duda una mejora.