Reference: 8430095616954
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not le
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
This item is sold in 10cm units, you can adjust the desired length, adding as many units as you want. We will supply you with the tube continuously for lengths less than 2m. (for example, if you add 5 units we will send you a continuous tube of 50cm) Generic Teflon Tube Inner Diameter (ID): 1.9mm ± 0.15mm Outer Diameter (OD): 4.0mm
Reference: 8411322235803
Brand: 3dlac
3DLAC SPRAY 400ml - STRONG AND LONG-LASTING ADHESION - EXTENDED DURABILITY (APPROX. 400 APPLICATIONS) - NO WARPING Its function is to maintain the first layer of plastic to maintain the start of printing constantly, avoiding undesirable errors. 3DLAC is the perfect replacement for Kapton tape and otros types of fasteners due to its cost savings and easy...
Banner
Extruder Connection PCB Board & Hotend for Artillery Genius
21mm 24-pin girdle slot
Not valid for Artillery X1 (needs the 20-pin version)
Read the review
Manufacturer: Artillery 3D
Reference: CUVOLPT100
Silicone cover for the MK8, MK9 and MK10 extruder hotend. Not compatible with e3D or compatible extruder hotend. A silicone cover guarantees the protection of the hotend as well as providing a more stable printing temperature during the first few layers, by protecting it from the air generated by the layer fan once it bounces off the printing bed. The...
Reference: REF000606
Precision needle kit for the proper cleaning and maintenance of your printer nozzle. Always use with a hot nozzle Each kit contains 10 needles
Reference: ARTD012
Brand: Artillery 3D
Original heater for the hotend of your Artillery X1 or Artillery Genius.24V, 64W, VH3.96 Terminal
Reference: ARTD013
Brand: Artillery 3D
Temperature Sensor (Thermistor) original for Artillery X1/Genius/x2/Genius Pro Connector-XH2.54, length 80mm, head diameter 3mm Photo shown for illustrative purposes, product may not correspond exactly as Artillery It supplies sensors that, while they are all compatible, are not aesthetically the same.
Reference: ARTY016
Brand: Artillery 3D
21mm- Flat Data Cable Width 21mm Length 500mm 20 pins Not valid for Artillery GENIUS (needs the 24-pin version)
Reference: ARTD021
Brand: Artillery 3D
24mm Stepper Motor (Shaftless Height) for Printers Artillery or any model with an engine of the same size/type.
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: 575-1317
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the opti
Reference: ARTW002
Brand: Artillery 3D
Original flat data cable for X-axis motor Genius/Genius PRO (Not valid for Artillery X1/X2)
Reference: ARTY042
Brand: Artillery 3D
Original flat data cable for Artillery Genius/Genius PRO/X3 PRO Width 25mm Length 420mm 24 pins
Reference: ARTW007
Brand: Artillery 3D
0 review
PCB Board for X-Axis Artillery Genius / Genius PRO / X2 Compatible with 31mm and 21mm girdle (24 pins) Not vali
Reference: 6834898797346
Brand: Artillery 3D
Hotend Complete for Artillery X1(with smooth extruder lid) / X2 / Genius PRO/Genius. Includes: Barrel Smooth Bore 4.1 Heater Thermistor Silicone Case Brass nozzle 0.4mm * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTACE40
Brand: Artillery 3D
40mm adhesive cloth (acetate) tape, used to fix the flat cables of Artillery to the aluminum chassis cut into 30cm sections, valid for Artillery X1/Genius
Reference: 6834891883930
Brand: Artillery 3D
Kit for Artillery X1/Genius: Fan layer Fan Hotend
Reference: ARTW006
Brand: Artillery 3D
0 review
Extruder Connection PCB Board & Hotend for Artillery X2 /Genius PRO 21mm 20pin girdle slot Not valid for Artil
Reference: ARTZ082
Brand: Artillery 3D
0 review
Mechanical limit limit sensor for Artillery X2/Genius Pro Hornet, valid for X1 or Genius (needs a new screw 4 mm longer)
5
Extruder Connection PCB Board & Hotend for Artillery Genius
21mm 24-pin girdle slot
Not valid for Artillery X1 (needs the 20-pin version)
