- Pack

Reference: 8430095626656
Brand: Nazza
Isopropyl alcohol, also known as 2-propanol or isopropanol, is used as a cleaner for electrical contacts. -Does not leave residues -purity >99.5% isopropyl alcohol. It is NOT a dissolution -Slightly soluble in water Useful for cleaning the printing bed, as well as for cleaning the remaining resin on printed parts without a trace of stains.
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the options to select
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: REF000081R
Generic Teflon tube Inner diameter (ID): 1.9mm ± 0.15mm Outer diameter (OD): 4.0mm You can adjust the desired length, adding as many 10cm units as you want. We will supply the tube continuously for lengths less than 2m.
Reference: ARTD013
Brand: Artillery 3D
Original Temperature Sensor (Thermistor) for Artillery X1/Genius/X2/Genius Pro Connector-xh2.54,length 80mm, head diameter 3mm Photo shown for illustrative purposes, the product may not correspond exactly as Artillery supplies sensors that, although they are all compatible, are not aesthetically the same.
Banner
Kit for Artillery X1/Genius:
Reference: CAPPTFETL
Brand: Capricorn
This item is sold in units of 10 cm, you can adjust the desired length, adding as many units as you want. We will supply the tube to you continuously for lengths less than 2 m. (for example if you add 5 units we will send you a continuous tube of 50 cm) High quality Teflon tube, with very low friction and high temperature resistance. Capricorn XS vs TL...
Reference: ARTD012
Brand: Artillery 3D
Original heater for the hotend of your Artillery X1 or Artillery Genius.24V, 64W, VH3.96 Terminal
Reference: ARTD013
Brand: Artillery 3D
Original Temperature Sensor (Thermistor) for Artillery X1/Genius/X2/Genius Pro Connector-xh2.54,length 80mm, head diameter 3mm Photo shown for illustrative purposes, the product may not correspond exactly as Artillery supplies sensors that, although they are all compatible, are not aesthetically the same.
Reference: ARTJ055
*All metal: the inlet teflon only reaches the top of the barrel, the rest of the way is through the metal interior of the barrel, it prevents the inlet teflon from touching the nozzle, making it suitable for high temperatures at which teflon can degrade. However, this type of barrel requires a few degrees higher temperature and is usually more prone to...
Reference: 6834895210152
Heatbreak or barrel of high quality all metal type in the inlet teflon only reaches the top of the barrel, the rest of the journey is through the metal interior of the barrel, it prevents the inlet teflon from touching the nozzle, making it suitable for high temperatures at which teflon can degrade. This type of barrel may require a few degrees higher...
Reference: ARTJ024
E3D volcano compatible aluminum block, volcano nozzle required Does not include thermistor, heater or heatbreak/barrel. Includes screws Valid for Artillery Genius and X1
Reference: 572-1205
Nozzles (nozzle) for 3D printer, valid for most printers and materials on the market. See in the description the options to select
Reference: TTART
Brand: Artillery 3D
Teflon tube Artillery Inner diameter (ID): 2mm Outer diameter (OD): 4mm Length: 10cm
Reference: REF000544AC
Precision-machined nozzles with a sharp tip. Some models have the size coding by dots on the head, being the coding 3 points: 0.4mm 4 points: 0.6mm 5 points: 0.8mm 0 points: 1mm * Price per unit
Reference: 6834898797346
Brand: Artillery 3D
Complete hotend for artillery X1 (with smooth extruder cover)/X2/Genius PRO /Genius. It includes: Barrel smooth bore 4.1 Heater Thermistor Silicone cover 0.4mm brass nozzle * The block is supplied as a set of parts, requiring assembly and tightening.
Reference: ARTACE40
Brand: Artillery 3D
40mm adhesive fabric (acetate) tape, used to attach flat artillery cables to the aluminum chassis cut in 34cm sections, valid for Artillery X1/Genius
Reference: ARTS014
Brand: Artillery 3D
Internal filament guide for Titan clone extruder. Compatible with Artillery X1, X2, Genius or Genius PRO titan extruders
Reference: 6834893940846
Brand: Makerex
Kit for Artillery X1/Genius/X2/Genius Pro: Heater Thermistor
Reference: 4025828567
Brand: E3D
This thermal paste is needed to transfer heat from the HeatBreak to the heatsink effectively. This 1 g envelope is the same one that comes with the HotEnd E3D kits and is perfect for helping the heatsink to dissipate excess heat. Composition: - 50% silicone compounds - Carbon compounds: 20% - Metal oxide compounds: 30% Please note: - The thermal composite...
Reference: ARTJ054
Brand: Artillery 3D
Metal extruder cover with integrated heatsink to improve thermal transfer for Artillery X1/X2/Genius/ Genius PRO printers. Valid for Kraken type barrels/heatbreaks (flat)
Kit for Artillery X1/Genius: